Products » 'H' Type Power Press
FMT ®brand Heavy Duty mechanical Power Presses are coming in PILLAR / "H" frame versions from 5 tons to 200 tons capacity in most economical type of construction with several std./optional features such as manual/auto lubrication systems, knockouts electronics safety, Single/Double or Un-geared versions as also Pneumatic feeders/straightness & die-coilers for automatic Purpose.
The frame is fabricated from solid steel plate with heavy cross ribbing, the structure is designed for perfectly balanced distribution of stress over the cross section eliminating deflection& vibration, in result increased tool & machine life.
The Clutch is made of special alloy steel, The pin / rolling key is manufactured from W.P.S. / EN24 material & with proper heat treatment to ensure trouble free long life & give continues stroke for mass production.
The Crank shaft is made of special alloy steel & precisely machining it to grind finish & fitted in Graded Gun-Metal Bushes for smooth working, longer life & accuracy.
The unique feature of adjustable stroke enables the press to perform all kinds of operations by employing short stroke for blanking and forming operation.
An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.Oil cups & Grease point are provided for lubricating the sliding surfaces & moving parts. 50 ton & above Hand operated pump provided. Also Motor operated lubrication system offered against request.
Ram Slides is made of high grade heavy duty cast iron & properly seasonal & fitted with Hylum Sheet on back side for friction free travel through slides, ensuring longer life of die and easy operation.
Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the pressing operation, and properly balanced for smooth running.
Bed is made of high grade heavy duty cast iron & properly seasoned & properly aligned with ram to obtain high accuracy and precision press operation.
The Gears are made of steel castor fabricated. Gear teeth are generated by precision hobbing machine.
Motor pulley | Slide Adj.Spanner | Fly wheel & Gear guard |
Oil cups for lubrication point | Knock-out system .
Tow hand operated clutch | Extra base plate | Inclinable Type |
Electric Motor, Starter and V-belts | Single / continuous stroke | Automatic lubrication pump .
|CAPACITY IN TONS||-||5 Tons||10 Tons||20 Tons||30 Tons||40 Tons||50 Tons||60 Tons||80 Tons||100 Tons||150 Tons||200 Tons|
|Adjustment of Stroke||MM||38||50||63||76||76||89||100||115||130||150||150|
|Adjustment of Ram||MM||25||25||25||25||25||25||25||25||25||25||25|
|Punch Hole in Ram||MM||25||25||32||38||38||45||45||50||50||80||80|
|Hole in Bed||MM||63||76||82||89||95||101||115||130||150||200||225|
|Bed Size (Length x Width)||MM||381 x 254||457 x 304||660 x 380||762 x 431||785 x 482||810 x 507||840 x 558||890 x 583||915 x 635||1015 x 710||1140 x 787|
|Dist.between bed to Ram||MM||177||204||250||292||320||350||380||380||406||457||482|
|Strokes per minute||MM||80||70||45||40||35||35||30||30||30||25||25|
|For Geared(1440 RPM)||HP||1||1.5||2||3||4||5||7.5||10||10||12.5||15|
|For Ungeared(960 RPM)||HP||1||2||3||5||-||-||-||-||-||-||-|
|Floor To Top of Bed||MM||700||830||830||880||1000||1000||1000||1000||1000||1000||1000|
|Allover Size LR x FB x H||MM||700 x 600 x 1600||800 x 800 x 1900||1000 x 1000 x 2100||1000 x 1100 x 2200||1100 x 1200 x 2400||1200 x 1300 x 2500||1300 x 1350 x 2650||1500 x 1500 x 2750||1750 x 1750 x 2900||2050 x 2000 x 3300||2200 x 2150 x 3500|
NOTE: All Dimensions are in M.M. Design, Dimensions & Particulars are subject to alterations without notification.