MANUFACTURE OF POWER PRESSES
CAPACITY 5 TO 200 TONS
AN ISO 9001:2008 CERTIFIDE COMPANY

foreman

Products » OVER CRANK SHEARING

Foreman Machine Tools Pvt. Ltd. Guillotine Shearing Machines have been designed & develop through structural analysis technique for continuous production,accuracy and repeatability.

FRAME:

Rigid Steel Frame of Kishan shears are optimally designed to avoid weak sections and is of interlocked design. The Ram is guided throughout its length by accurate machined guide ways ensuing proper clearance and clean out.

CLUTCH, BRAKE & DRIVE:

Revolvig Key Cluth Iinked with the Main Gear engages every time when Fool Pedal Is pressed. Drive provided through V-Belt & all journals are fitted in Gun Metal Beanngs. Brake is adjustable and incorporated on end of Crack Shaft.

HOLD DOWN SYSTEM:

Hydraulic Hold Down Pads are actuated by Hydraulic Power Pake/ Cam Operated Pump. Hydraulic Hold Down Pads had the Sheet Securely to avoid slipping and bowing resulting in cean square cut .Hold Down this are Provided with oversize pads to avoid impressions on sheet metal on request.

LUBRICATION:

All bearing parts and guide surfaces are lubricated through hand operated lubrication system.

BLADES:

Foreman Machine Tools Shears are provided with high qualty single segment (HcHc.r) Blades fa longer tool Life. Ease in assembIing of knife reduces down time, the shear Blades are four edged.

MECHANICAL BACKGAUGE:

This is a standard equipment proved Foreman Machine Tools Shears. Scale on the back gauge gives instantaneous reading of distance Between Shear and Back Gauge, thus avoiding was and maintenance encountered in electronic equipment.

POWER SUPPLY:

400/440 Volts,3 Phase ,50 Cycles,All Dimensions Are in mm.

foreman

STANDARD ACCESSORIES:
Gear & Wheel Guard | Hand Operated Back Gauge |
Manual Lubrication System | T-Slot Front Supporters |
Front Scale Gauge | Hydraulic Hold Down & Instruction Manual.

OPTIONAL ACCESSORIES:
Automatic Lubrication System | Electricals consist of Electric Motor |
Control Panel | V-Belts | Stroke Counter | Ball Roller or Ball Transfer |
N.C. Back Gauge | Extension Squaring Arm | Foundation Bolts |
Motorized Back Gauge With DRO.

foreman
MODEL CUTTINGCAP.IN MS LENGTH * THICKNESS STROKE PER MINUTE TABLEHEIGHT TABLE WIDTH FRONT GAUGE REAR GAUGE MOTOR HP/KW BLADE LENGTH x WIDTH x THICK LEANTH A BREADTH B HEIGHT C
FSOC-1 1270 x 6 25 750 450 600 600 7.5/6.5 1270 x 75 x 18mm 2200mm 1900mm 2200mm
FSOC-2 1525 x 6 25 750 450 600 600 7.5/5.6 1525 x 75x18mm 2500mm 1950mm 2300mm
FSOC-3 2030 x 6 25 750 450 600 600 10/ 7.7 2030 x 75 x 18mm 3000mm 1950mm 2300mm
FSOC-4 2540 x 6 25 750 450 600 600 10/ 7.7 2540 x 75 x 18mm 3550mm 1950mm 2300mm
FSOC-5 3125 x 6 25 750 450 600 600 15/11.2 3125 x 75 x 18mm 4150mm 1950mm 2400mm
FSOC-6 1270 x 8 20 750 450 600 600 10/07/07 1270 x 75x 18mm 2250mm 1900mm 2200mm
FSOC-7 1525 x 8 20 750 450 600 600 10/07/07 1525 x 75x 18mm 2570mm 1950mm 2300mm
FSOC-8 2030 x 8 20 750 450 600 600 12.5/9.7 2030 x 75x 18mm 3150mm 1950mm 2500mm
FSOC-9 2540 x 8 20 750 450 600 600 15/11.2 2540 x 75 x 22mm 3670mm 1950mm 2500mm
FSOC-10 3125 x 8 20 750 450 600 600 20/15 3125 x 75 x 22mm 4250mm 1950mm 2600mm
FSOC-11 1270 x 10 20 800 450 600 600 12.5/9.7 1270 x 100 x 22mm 2300mm 1950mm 2400mm
FSOC-12 1525 x 10 20 800 450 600 600 12.5/9.7 1525 x 100 x 22mm 2600mm 1950mm 2400mm
FSOC-13 2030 x 10 20 800 450 600 600 15/11.2 2030 x 100 x 22mm 3200mm 1950mm 2600mm
FSOC-14 2540 x 10 20 800 450 600 600 20/15 2540 x 100 x 22mm 3700mm 1950mm 2600mm
FSOC-15 3125 x 10 20 800 450 600 600 25/18.7 3125 x 100 x 25mm 4300mm 1950mm 2600mm
FSOC-16 1270 x 13 20 800 450 600 600 15/11.2 1270 x 100 x 25mm 2300mm 1950mm 2500mmm
FSOC-17 1525 x 13 20 800 450 600 600 15/11.2 1525 x 100 x 25mm 2600mm 1950mm 2500mm
FSOC-18 2030 x 13 20 800 450 600 600 20/15 2030 x 100 x 25mm 3250mm 1950mm 2600mm
FSOC-19 2540 x 13 20 800 450 600 600 25/18.7 2540 x 100 x 25mm 3750mm 1950mm 2600mm
FSOC-20 3125 x 13 20 800 450 600 600 30/22.5 2125 x 100 x 25mm 4350 1950mm 2600mm
FSOC-21 2030 x 16 20 800 450 600 600 25/18.7 2030 x 100 x 25mm 3450mm 2100mm 3100mm
FSOC-22 2540 x 16 20 800 450 600 600 30/22.5 2540 x 100 x 25mm 3950mm 2200mm 3100mm
FSOC-23 3125 x 16 20 800 450 600 600 40/30 3125 x 100 x 25mm 4350mm 1950mm 3100mm

NOTE:Electricals & Blades are not under Warranty.Specification / Design are Subject to change without prior notice